How to Replace the Replacement Key Battery For the Saab 9-3
saab car keys owners have a unique procedure to add the second key. This requires a handheld computer, called Tech-2, to be used by the dealer. Then, a new transponder and key are required to be purchased.
Change your keys regularly to prevent one from deteriorating faster than another. This will help to keep your keys in perfect condition.
Replacement Case
As opposed to the traditional saab key fob repair keys of old keys, the new key fobs have electronics inside which makes it more difficult to copy. This has made car theft much more difficult than it was twenty years ago. However, it has also made replacing lost saab keys keys a comparatively expensive endeavor.
Every owner of a 9-3 Saab should have at minimum two working keys. It is expensive to replace a lost key because it requires replacing the CIM module, as well as changing the locking cylinders. Dealers charge between $100-$200 for this.
There are some ways around these costly. Some parts dealers will use the code of the spare key to cut a brand new metal blade for less than that of a dealer. The key must, however, be identical to the original in order to function in your vehicle.
You can also replace the case yourself by following these steps. You will need a flathead screwdriver along with some patience. With the screwdriver slowly break the plastic and separate the emergency keys from the case. After the case is open take out all electronic components and put them in your new case. Place the key with the correct badge inside the case.
Replacement Battery
The Saab 9-3 replacement battery is a low-cost component that can be quickly and easily replaced. Cyclone’s YouTube video Cyd demonstrates the procedure for replacing the remote fob battery in only four steps. This tutorial can be used for any modern saab key fob, however, the procedure may differ slightly.
This button is usually placed near the saab 93 key fob replacement logo on the back of the fob. The button is usually found on the back of your fob right next to the Saab Logo. Then you will need the flathead screwdriver to insert into the small hole in this button. This should be enough to open the case of the fob so that you can replace the battery.
Once the new CR1632 battery is in place then you can reassemble your remote key fob and program it to your car. The entire process should not take more than an hour or less. It is a simple process that does not require any special equipment.
The procedure is a little more complicated if you’ve lost your key, but it’s possible. The dealer needs to first determine the VIN of the vehicle, and then purchase an alternative TWICE module, as well as a key blade with the correct unique code. The dealer will then have to program the key using MDI, a brand new software tool.
Replacement Key Fob
The key fob is the piece that locks and unlocks your car. It has a battery within. The batteries are able to last for and will eventually expire. This is a problem that occurs in all vehicles. The good news is that you can replace the battery in all key fobs, without having to replace the entire case. You can buy fobs replacements on Amazon that include all the electronics already installed, which means you can just pop open the case and replace the batteries that were in the case. It’s important to note that you’ll need to remove the emergency key first. you can do this by putting the small screwdriver flathead into the slot in the middle of the case. Work the screwdriver around the case, and it should split open, making it much easier to take it out.
When you are ready to replace the keys, ensure you have a spare since this will cut down your total cost by a significant amount. If you have an additional key, ask the dealer to cut it and program it for your car. This is much less expensive than buying a new key fob.
If you don’t have a spare, it is possible to add a second key to your car, but this requires a lot of research and effort. A second key can cost several hundred dollars and it also requires programming of the car’s computer. Professionals can do this, but it’s an expensive option.
Replacement Ignition
In contrast to earlier saab spare key automobiles, the new SAAB 9-3 models have an extremely sophisticated alarm system that is based on a coded key. If you lose your only key, it may be costly to replace it with another one, as the car has to have a specific computer installed and also be programmed to accept a new key. Dealers can charge hundreds of dollars to program an additional key if they are unable to do it.
Dealers will charge you a premium to replace your car’s computer (also called the CIM or SAAB twice) in the event that you lose your only functioning key. We can reprogramme the existing EEPROM of your car’s computer to make it ready for an additional key. This will save you more than 50% off the cost you would spend at a dealer.
If you’ve been an owner of a 03-11 SAAB 9-3, then you likely know that the ignition key isn’t very robust. If your ignition key isn’t functioning properly, you must look into replacing it. They can become extremely sticky and the buttons have been known to fall off. It’s good to know that replacing the ignition key isn’t as complicated as it seems and is fairly easy to do using the proper tools.
