UPVC Window Handle Replacement
Replacing a broken window handle is a relatively simple process and, with the right tools, it can be done quite quickly. It is important to know your handle’s type and spindle length before buying the replacement.
Older uPVC windows have cockspur handles for windows. They have an extension spur that can the lock of a wedge cockspur striker plate. They can be left or right-handed and must be to match when replacing.
What kind of lock or handle do you have? I have
There are a variety of upvc window locks and handles each with its particular advantages and uses. The type of handle that you own will determine whether or not the locking mechanism you have is effective and if it is easy to open windows. Over time and through regular usage, the window handles made of upvc may become damaged or worn out, rendering them less secure and efficient. In some cases they might even disappear completely. It is crucial to fix your upvc window handles as soon as you notice they are falling off. This will help avoid burglaries and ensure your home is secure.
It’s a simple job that anyone can complete. With just a few tools and the right information it’s a straightforward procedure that should take no less than a few minutes. It is important to know the kind of handle or lock that you have on your window. This will allow you to choose the appropriate replacement.
Inline Espagnolette Handles
These are the most common type of upvc window handle replacement handle and are usually located on the other side of your window. They are flat and feature an opening that engages the locking mechanism of the window frame. Inline upvc handles come with a spindle running through the middle of the handle and into the glass window replacements frame in order to control the latch.
Cockspur Handles
These handles are usually found on older uPVC window frames. They have an unusual hook-shaped design. Cockspur handles have a single screw that is used to secure the handle to the window frame and aren’t as secure as other kinds of window handles.
Handles that tilt and turn
The tilt and turn handles are different from other upvc handles because they can be turned to open the window and then lowered into the window to allow air circulation. They feature a 7mm spindle at the back and are available both in right-hand and left-hand versions.
When purchasing replacement handles made of upvc, it is important to measure the spindle’s length since not all of them are identical in size. Drop something in the middle cost of replacement windows uk the hole to check the length. This is the longest spindle length that will be suitable for your window.
What is the spindle?
uPVC window handles function in a similar way like doors. By turning the handle, you are able to open a latch in the frame. The latch opens the window, so it can be opened and closed. These handles can be damaged, especially if they’re frequently used or subjected to harsh conditions. You may need to replace the handles on your uPVC window if they are not operating correctly.
There are many different kinds of uPVC handles available comprising Espag, Cockspur and Spaded handles. These handles are designed to fit into the uPVC frames in various ways and each handle type utilizes a specific spindle to lock the mechanism into the window. This is why it is essential to identify the type of handle you have on your uPVC window to find the right replacement windows prices.
The base section of the handle will inform the type of uPVC it is. A snap-in covers should be over the screw that holds the base of the handle in position. Take it off and you should be able see the second holding screw located at the opposite end of the base section of the handle. After both screws have been removed, you should be able take the handle out of the uPVC.
After you have removed the uPVC handle, carefully remove it from the locking mechanism. Take careful note of the length of the spindle, as you’ll need to ensure that you purchase an alternative that is the same length as the original handle and locking mechanism.
The main issue with most double glazed window replacement handle problems with uPVC is that the handle spindle gets worn-out and is unable to longer operate the locking mechanism. This could be due to corrosion, damage due to constant use or the locking mechanism becoming looser. If this occurs, you will have to replace both the window handle and locking mechanism in order to restore the full functionality of your uPVC Windows.
How do I take off the handle that was previously attached?
Through time and regular use, window handles may become damaged or broken, and if this happens, it is crucial to repair them as quickly as possible to ensure the safety of your home. It is easy to replace a worn or damaged handle. The job can be accomplished in under a minute without the need for special tools.
To take off the handle, first remove the screw at the bottom of the handle. After the screw is removed, the handle can be pulled away. A second screw is situated at the base of the handle. This can also be removed. Once these two screws have been removed, the handle can be removed from the base of the window.
After the handle has been removed, grab the new handle and align the fixing holes with the holes that are present in the window frame. There may be a little sticker or caps on the new handle, so take off them if needed and then screw the handle into the frame. Once the handle is in place it is crucial to verify whether it functions by turning the handle and ensuring that the lock mechanism activates.
Espag handles feature spindles that extend out of the handle and slots into the multipoint locking mechanism of the frame of the window. Cadenza windows feature blades with cut-outs that slot into the lock mechanism while Cockspur handles have a long nose that hooks over either the outer frame or transom bar cross member within the window.
Once you have the new handle in place, slide the spindle into the window lock and then tighten it down. When the handle is fixated then replace the snap-in cover and screw cap (if applicable). Now that the handle is ready to use, you can open and close the window a few times to make sure it is working correctly and securely.
How do I install the new handle?
Changing your uPVC window handle isn’t difficult, and the process is simple. All you need is a screwdriver and small amount of patience. First, make sure that the handle that you are replacing is unlocked. Then, remove any visible screws. You could also replace them with screw caps. After the handle has been removed, you need to make a note of the length of the spindle which protrudes from the back of the handle. This is crucial as it will determine what type of handle you need to purchase.
Espagnolette handles are the most popular type of handle for uPVC windows. The spindle runs through the handle to operate the locking mechanism in the frame of the window. The handle releases the latch and allows the window to open. During regular use and time, handles made of espagnolette can be damaged.
Cadenza handles are a type of uPVC handle that is commonly used in tilt and turn windows. They feature an extended blade that works the multipoint locking mechanism inside the window. They are more secure than an espagnolette handles since they only open from the inside. They can be replaced using the same method as espagnolette handles but you should make sure that the new handle has a curved blade instead of flat ones.
Once you have selected the correct handle, you can align the new handle to existing screw holes prior to screwing it in place. Then, you should put the screws on and test the new handle. You can perform this by moving the handle back and forth from the locked position to the unlocked one several times. It may be worth contacting an expert to determine if you can resolve any issues. They can advise you on how to resolve the issue in a timely and efficient way.
