How to Replace a Saab 9-3 Key
The Saab 9-3 is a great car that provides a lot of appeal for drivers. It has a powerful engine and excellent visibility. It also has an excellent safety rating.
However, it is important to make sure that you have two keys that work for your car. If you lose one key, it could be very expensive to add a new one.
How to replace the ignition Key on the Saab 9-3
You’ll must replace the car key in case it isn’t turning. This guide will teach you how to replace the ignition key on a Saab 9-3. You’ll need a replacement key for saab 93 key, a new reprogrammable battery and a new key-fob cover.
Modern Saab models employ a transponder instead of a metal key to unlock the car and begin it. The issue with this is that the reprogrammable batteries in the key-fob eventually wears out and will not hold a charge any longer. This is especially true if you keep using the same key on the same lock.
The good news is that the battery can be replaced easily by an experienced locksmith. If you have the right tools, and a little patience you can do it yourself. The first step is to take the key-fob apart. Insert an open-ended head into the slot that is in the middle of your case. You must be careful, as the plastic is very thin and can be damaged easily.
Once the case is opened, you can make the new key by combining lower part of the old key with the transponder and banana. This will ensure that the new key is linked to the CIM correctly, which can make all the difference when replacing the primary key for your saab replacement key 9-3.
how to open a saab 93 without a key (https://telegra.ph/5-Laws-Anyone-Working-In-Replacement-Saab-Key-Should-Be-Aware-Of-08-02) do I replace the ignition Key on the Saab 900
If you don’t have two keys, you will have to take off the steering wheel and dashboard to gain access to the ignition. Begin by disconnecting the negative battery cable. Once the battery is disconnected, you can remove the dashboard and trim pieces that surround the steering wheel. Once the dash is taken off, you can push a screwdriver into the opening in the back of the ignition switch and remove it.
The ignition barrel has key locks that can prevent the vehicle from starting if key isn’t there. If the ignition switch on your 900 isn’t working properly, check the key to determine if it’s in the lock or snared into the ignition barrel. It’s also recommended to rotate your keys on a regular basis and clean them regularly so that one doesn’t become bent.
Saab cars differ from other cars because they don’t make use of traditional keys made of metal. Instead, the car can recognize the electronic signals generated by the key fob through a special chip embedded in it.
If you lose only one working key fob your dealer will charge you the cost of replacing your computer module (also called the CIM). However, we can reprogram the existing computer EEPROM and prepare it to accept new keys without replacing it. This can save you over 50% of the price the dealer charges! We call it the SAAB KEY PROGRAM. Find out more about it here!
how to program saab 9-3 key fob to Replace the Ignition Key on a saab 93 key fob 9-5
The metal portion of a traditional Saab key is simple to copy, and it’s not much of a deterrent against vehicle theft. The electronic component of the key-fob is equipped with an electronic chip that detects the car when the key is inserted in the ignition switch.
Saab has relied on the technology of this anti-theft device for more than a decade. It’s not as good as a physical lock on the door but it makes the act of stealing your car harder. Every Saab owner should keep a spare Saab key in their vehicle.
The majority of new Saabs come with two keys right from the factory, however you can purchase additional keys at the dealer with a handheld computer, called Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is for NG 9-3 cars, which are equipped with newer, more modern features that require a different key-fob and use a different method of operation.
If you lose all keys or keys, the dealer will replace your CIM or TWICE modules and charge an extra fee. However, we can reprogram the EEPROM on your computer and prepare it to accept new keys, without replacing the expensive modules.
How to replace the ignition Key in an XC90 saab 93 key fob
If your SAAB 9-3 key fob is having problems turning the lock barrel, it may be time to replace it. The process is quite simple and doesn’t require you to visit an agent. Instead you can do it yourself at home, using just some basic tools.
You’ll first need to prepare the keys for your new car. Before you start, disable the anti-theft system by placing blocks under your rear wheels and engaging your handbrake. Place the key in the ignition, and then turn it to the “on” position. This will activate the accessories, but will not start the engine. Repeat this five times and leave the key in the on position.
Next, you’ll need to buy a new case for your old key fob. These are available at most auto parts stores and are usually quite affordable. Based on the model, you may even purchase them without electronics.
To open the case simply push the flathead screwdriver into the slot in the middle. When you’ve split the case, you will have access to all the internal electronics. Use a flathead screwdriver, which will gently pry open the electronic components.
