In Wall Fireplace – How to Choose the Right Height and Depth for Your Fireplace
A fireplace in the wall gives a sleek and polished look without the cost of mantles. It is one of easiest electric fires fireplaces to install.
There are a few aspects to take into consideration prior to purchasing your fireplace in wall fires. Follow these guidelines to get the most out of your purchase.
Height
While it may appear to be a simple question, figuring out the height of your new fireplace is among the most important decisions you make. The size of your fireplace’s height can affect everything, from how well it fits into a room to its visibility. Your fireplace could look strange in the event that it is set too high. It can also take away from its attractiveness. A fireplace that is too low could be lost within the wall space.
Luckily electric fireplaces are adaptable enough to be positioned at a variety of heights. The majority of people install their fireplaces in a seated position at eye level. This requires a height between 40-42 inches. Some people place their fireplaces under their TVs, which can be an attractive option.
The height of your fireplace depends on several factors such as the size and length of the wall you want to put it on. The bigger the room is, the bigger it will be. This could mean that you’re able to fit a larger fireplace in it. The length of the wall is also crucial because a wall that is longer can support a fireplace that is larger.
Another important aspect to consider is how you plan to make use of your fireplace. If you intend to use it solely to decorate your home, it is recommended to choose a lower height. If you plan to use it to heat your home it is necessary to make sure that the fireplace is tall and sturdy enough to withstand the safety standards.
It is essential to choose the appropriate height for your fireplace, so that it is in line with your decor and be simple to clean or fill. It is always a good idea to ask an expert fireplace installer to assist you if you aren’t sure what best height to choose. They will be able to recommend the perfect height for your fireplace according to their experience and the specifics of your home.
Depth
A fireplace’s depth is important to consider if you intend to install it in a recessed location. If you are going to cut into your wall, ensure that you have enough space to accommodate the interior design of your fireplace (the smoke shelf area above the fireplace box, the flue which runs through the roof, and the fireplace itself). Also, think about the space available for the surround, and whether you want a fireplace mantle.
Many of the newer electric fireplaces come with the depth of being almost concealed, creating the appearance of a “built-in” look. This kind of electric wall fireplace is best illustrated by the Panorama BI Deep series. It has a 5.8-inch depth that lets the viewer view the flames and ember bed, and not the frame. The media package includes driftwood logs in natural looks white pebbles, as well as clear glass crystals to add a luster to the embers and reflect the flames.
Wall-mounted gas Fireplaces Wooden, Phrasedirectory.Com, are also available in deep and shallow models. When deciding on the depth of your fireplace it is important to remember that these fireplaces are supplementary heating sources and must be properly vented by a skilled professional. When determining the depth of gas fireplaces, you need to think about the length of the vent pipe as well as the size of the chimney.
It is essential to read and carefully follow the instructions provided by the manufacturer when installing your fireplace. In the majority of cases, a professional installer is recommended. It is also best to have an extra person available when installing a gas fireplace.
Adding an in-wall fireplace to your home could be an great way to boost its value and also add ambiance to your living spaces. It can also reduce your heating costs. It is an excellent alternative if you cannot fit an old-fashioned fireplace into your home due to space constraints or due to the location of a chimney.
Surface Mount
Surface mounts are an excellent option if you don’t want to or aren’t able cut into the wall to install an electric fireplace. They also give it a sleek built-in look. Certain models, such as the Allusion line of electric fireplaces, can be installed partially recessed into a wall without compromising the heat output.
To begin the installation start by marking the wall using a pencil on the wall where the bracket is to be placed. Utilize a stud-finder to find the studs and then place each bracket in front of at least one stud for stability. If a stud is not reached or is not suitable for your fireplace, you could use drywall anchors as a support.
After you have marked the location of mounting brackets on the wall using a power drill, you can use it to install them and make sure they are aligned correctly with the studs. You can use studs or plastic anchors to connect each bracket. Once the mounting brackets are installed, lift your fireplace and place it on the wall bracket. When the fireplace is in place, make sure it is level.
Before you proceed with the installation, plug in your fireplace and check that all the features are functioning correctly – turn on the flame and start the flames. play around with embers, heat, bed lights and more. Once you’re happy with the results you can now install your floating mantel.
Depending on the model of your fireplace, you’ll either require a wire connection to the appliance wire connector in the lower part of the mantel. Or in the event that your fireplace has slots or hooks on the back, connect them to the slots on the wall mounting brackets. After you’ve completed this, follow your fireplace’s owner’s manual for specific instructions on removing the front glass panel and putting it back inside the opening.
If you have to alter the height and width, you should replace the glass front once you have removed the front panel. If your fireplace comes with ember bed media, spread it out across the top of the grate to give it a a more natural appearance and then secure it using the screws included.
Plug-In
Unlike traditional wood-burning fireplaces, electric fireplaces don’t require vents or chimneys. They plug into standard outlets they provide supplemental heat to rooms up 400 square feet. They also offer multiple heating and flame settings, so that you can alter your ambiance. Some models feature LED lighting effects to highlight the flame and embers. Others include an upper grille grate that hides manual controls but easily pops open to reveal pushbuttons to set the desired setting.
Electric fireplaces that plug in can be mounted directly on walls or recessed into the wall for an aesthetically pleasing appearance. These fireplaces are usually simpler to install than a mantel fireplace. Some units include a pedestal to permit you to place the fireplace on flat surfaces like dressers or buffets. Included are the remote control, mounting hardware, and a log set. Electric stone fireplaces can have both heat and flame options that can be removed to create a year-round atmosphere.
Some models have adjustable privacy glass that you can quickly change from fully transparent to partially. These models are popular for walls that divide zones of entertainment such as dining and living rooms. They can also be utilized in bedrooms where the addition of a fireplace can be a cost-effective method to take the chill off the space without sacrificing privacy.
While plug-in electric fireplaces don’t need to be hardwired like built-in versions they must be installed on an area that is at the very least not stud-free and is able to support the weight of the fireplace. Some models include a kit to make this process easier, including a pre-wired power cord as well as an specialized mounting bracket. This kit is suitable for drywall installation or concrete installation.
When deciding on a place for your wall-mounted electric fireplace, make sure it’s close to an electrical outlet. Plug-in electric fire places can be plugged in to outlets that are on the same circuit as the electric fireplace, or into a separate outlet. It is best to choose a dedicated circuit so that nothing else in the home will operate at the same voltage and potentially trip your breakers.
