Double Glazing Door Lock Repairs
Have you noticed that your uPVC window or door mechanism become faulty? Maybe the window or door handles don’t meet up properly or are hard to use.
You will lose energy if your double Glazed window repairs-glazed doors don’t work properly. This also increases the risk of burglary. Owen the Locksmith can repair your door lock at a reasonable price.
Snapped Key
It can be quite frustrating when a key snaps inside a lock. It also poses a security risk since the door may not lock and could leave you vulnerable to burglars. Fortunately, there are some simple fixes you can use to solve the issue and get your door working properly again.
Be calm. If you panic, you could end up pushing the broken key further into the lock.
Next, spray WD-40 or another penetrating oil into the lock to aid in making the broken piece slide out more easily. You can also use a screwdriver to break any pieces stuck. If you have a chunk of the key that is stuck out, grab it with a paperclip or another thin metal object and pull it. Both methods work, but be careful not to push the broken key further into the keyway.
Some paperclips come with grooved edges that can be used as hook extractors. Jigsaw blades also work well for this. If you don’t have any of them handy, you can use needle-nose pliers to bend them and create a hook. Also, a pair tweezers is a good way to grip and pull out the remaining piece of the key that was broken.
If you are unable to get the broken piece of key out, try using a lock de-icer. This is usually found in most hardware stores, and it is used to freeze any water or ice that could be inside the lock.
If none of these solutions work, it might be time to call a locksmith. The experts at Fitlocks can quickly fix problems with uPVC door locks and mechanisms that have snapped keys as well as broken handles. They can also alter the double glazing windows repair glazing door mechanisms so that they are more easy to use. Book a double glazing repair with us online or give us a phone call to discuss your needs.
Broken Cylinder
A damaged cylinder could pose a major security risk. A professional locksmith can easily fix the cylinder. A locksmith will have to tap the cylinder in order to repair it. This can be accomplished with the hammer or other tool. The best method is to employ a wire or long match. Then, position the match’s end or wire near the keyway. The locksmith will then strike the lock in order to crack it. This is much better than using a heavy hammer, which could cause damage to the lock.
Overheating is the main reason for cylinder heads to crack. This can occur when the cylinder block and cylinder head are made from different metals, such as cast iron and aluminum. When different metals heat up and cool down at different rates, it can cause localised hotspots that expand faster than the rest of the cylinder head, thus leading to cracks.
Another possible cause for cracks in cylinders is corrosion. If the cylinder head and cylinder block are not properly maintained, this can cause corrosion or rust, which may cause them to expand at a greater rates than they should. This could lead to cracks over time.
If your uPVC window or door lock is brittle and requires a lot more pressure to turn, it could be due to a variety reasons. This problem can be caused by a malfunctioning locking mechanism or misalignment, and also a worn out handle.
Fortunately, this is an easy and affordable fix for the majority of homeowners of double glazing. A professional locksmith will typically be able to resolve this issue within a matter of hours of arriving at your home. Depending on the needs of your home they will be able to replace the locking mechanism, replace the window handles, and also change the gearboxes. A locksmith with experience will always be able advise you on the most cost-effective options for your home. They can even suggest upgrades to high-security 3 Star Euro cylinders, TS007, that will add an extra layer of protection against burglars. It’s a small price to enjoy the peace of mind that comes from knowing that your uPVC door is secure.
Broken Handle
It’s not a surprise that window handle locks could break. They have intricate mechanisms that become less effective over time. It isn’t always easy to pinpoint the reason behind the broken window handle lock and repair double glazed window it correctly.
The issue could be with the internal locking mechanism or the latch, fixing your broken handle can improve your uPVC double glazing door’s security as well as help you to stop drafts. If you do not repair or replace your handle can be very expensive and can damage the door’s frame and lock It is therefore worth taking some time to do it correctly.
Screwdriver When the window is open remove the screw that holds the handle. The screw should be located on the inside of the backplate, usually covered by a screw cap for aesthetic reasons. Be sure to not damage any of the internal components within the handle, for example the levers or plates on the opposite side of the spindle. It is best to keep them in the same order so that you can re-install them when needed.
Then, turn the handle to make it 90 degrees to the window frame and loosen the screw at the back of the handle which holds it to the internal spindle with a second screwdriver. Once the screw is loose, you can take the handle off and remove the broken spindle. Replace this with a new one, making sure that it’s the same size as the previous one (you can typically find these online or in hardware stores) and securely screw it into the correct position. Be careful not to overtighten because this could cause damage to the handle or the window frame.
Check that the new handle is fitted after which you can close and test the handle. It should operate smoothly, and you will be able open your window once more.
While you’re working on the handle, be sure to ensure that your uPVC windows are shut properly. If they’re not closing properly then you may experience damp and draughts inside your home as well as compromising the energy efficiency of your home. A local window company, such as Core Sash Windows, will be able to adjust the hinges on your window frames so they can shut properly.
Broken Spindle
It is often the case that the spindle within the handle breaks, rather than the handle itself. This is especially typical in uPVC tilt and turn windows. These windows require a handle to operate an locking device within the window frame. The handle is attached to a centre rod that triggers a set of cams that resemble mushrooms, which secure the frame of the window. If the dead latch mechanism is not able to open when the handle is turned, it’s likely the spindle has been damaged. This can be a problem that is frustrating.
There are solutions to this problem. A reputable locksmith can swiftly and efficiently fix this problem. They can take apart the window handle using a tool that can remove the wheel component of the mechanism, where the spindle is. This is done without causing any damage to the handle or causing other damage to the window frame.
After the wheel has been removed, the technician will examine the spindle to determine what caused it to break. This involves breaking down the spindle into its component components and carefully observing their general condition, as well as any particular areas of damage or excessive wear. This process is typically done in a clean, well-lit room by skilled technicians.
The next step is to clean the damaged spindle, this will remove any debris or dirt that might be obstructing its normal function. The spindle may then be repaired or replaced. If the technician is replacing the spindle the dowel can be used that is similar in size to the original. Then, he will drill holes that are identical to both pieces. This will ensure that the spindle will fit perfectly with the handle.
If the damaged spindle can’t be repaired it may need to be replaced entirely. Home centers can sell generic replacements however if your window style is rare then you’ll have to speak with an expert in woodworking or cabinet making who can recreate the exact component. Once the spindle has been installed, it can be fixed to the handle. Line up the screw holes on the handle to the existing screws in the frame. Once the handle is firmly set, you are able to operate your uPVC windows.
