how to program subaru key to Change a Subaru Spare Key
If you lose your Subaru car key, you should call a locksmith. Locksmiths will usually cut keys for you at a lower cost than the dealer.
Fob remote “push to start” intelligent keys or a simple metal key are the two most popular kinds of Subaru car keys. The Fob key needs to have its chip programmed.
Keyless Entry System
The key fob can be used to lock and unlock your Subaru remotely. It also opens the trunk of your vehicle or the lift gate. The remotes use an inside keypad to connect to the vehicle’s computer system.
Certain models of Subaru offer a little-known feature called PIN Code Access. You can make a custom number sequence to start and open your car. If you own a newer subaru keys locked in car Forester, Outback, Crosstrek, WRX, WRX STI, or Impreza that has this feature, check the owner’s manual for instructions on how to use it.
It’s possible that the battery inside the key fob has died. The first thing to do is make sure that it’s got new batteries, and you can do this using a handheld remote tester or an ordinary multimeter in your home garage.
The next step is to remove the circuit board that controls the transmitter from the key fob and then examine it. It will have one or two sets of 8-digit numbers, so note down the first set so you can remember it later. Once you’ve done that take the key fob back together and you’ll be able to program it at home. This procedure is different based on the year and model of your car. However, it’s usually simple enough to complete yourself.
Key Fobs
Subaru’s most recent models all come with key fobs that can not only unlock doors however, they also turn on your lights, lock your gas cap, and even start your vehicle. That last trick is especially helpful if you’ve ever arrived at the pump only to find that your car won’t start because the battery in the key fob died.
It is likely that your Subaru’s key fob, regardless of whether it’s new or old and can be replaced. Be aware that some of the modern models, with the latest technology, might require visiting a dealer. With some effort and time, you can create your own replacement key fob.
Begin by opening the case and examining the circuit board of the transmitter. (Instructions on opening the case are usually found in the owner’s guide). It should have two or three serial numbers, each of which has 8 digits long. Keep the first set of numbers handy for later references.
After that, get in the driver’s seat. Close all doors. Turn the key 10 times to start your car, and then switch off. Press the lock button on the key fob, then open the door to verify that all doors function properly. Close the door, then take the key off. You should hear your car chime again, indicating that the key fob is programmed.
Ignition System
If your subaru Wrx Keys keys aren’t working as they ought to, it could be due to the fact that the battery is dead. You can replace the battery for your key fob on your own if you are familiar with the procedure. Battery replacement subaru key is affordable and easy to locate. If the key fob isn’t responding to your commands it could be a different problem. To obtain a spare, it’s best to go to a dealer. They’ll ensure that the key is a genuine Subaru key that’s under warranty and it’ll be programmed to your vehicle. This is a lot safer and more convenient than purchasing an aftermarket key from an organization on the internet.
The dealer is also able to cut keys for you, provided you provide them with your VIN number and as proof of ownership. They’ll use this information to code the new key in order to be accepted by the immobilizer. This procedure is more complicated than cutting a key, and the dealer will generally charge more for this service.
Once the new key is programmed, you can replace it to your existing key. You’ll only have five seconds to insert the second key, which is why it’s crucial to keep an active key in your bag. You can remove the key after the security light has stopped flashing and you can test it.
Battery Replacement
Subaru fobs are extremely useful since they can turn on the sunroof and power windows of your vehicle with a single button press. However, the battery that is in your Subaru key fob was not designed to last forever and will eventually require replaced. The good news is that replacing the battery is a simple process that you can do yourself with the assistance of this brief guide from Capitol Subaru.
You’ll first need to find the small gap that separates the front and back of your keyfob. You can open this seam with a flathead screwdriver and reveal the small compartment that houses the battery. Insert the new battery and make sure it’s facing in the correct direction. Remove the old one. After you have put everything together, you can use the new key fob to lock, unlocking, and starting your vehicle.
Always have a spare set of keys, particularly if the one you have is damaged or has been lost. You can purchase a brand new key at your local dealership or have it cut by a locksmith. It is essential that your key fob works properly as soon you can so that you can safely drive.
